Design Plan LED Apex / Apex Grill

. Low copper alloy cast

aluminum body

. Complies with ADA

. 3/16" thick UV stabilized

polycarbonate lens IK10++

. CSA listed wet label IP55

. Suitable for wall or ceiling mount

. Powder polyester finish

. Integral 120v or 277V power supply

. Dimmable with standard incandescent dimmers

Manufacturer: Design Plan

Applications: Facade Lighting, Wall Mounted Exterior

Spec Sheet (311 KB pdf file)

Design Tips

Facade Lighting
When lighting building facades with ground-mounted floodlights, three factors are considered:
Setback

The recommended setback is 3/4 times the building height. If a building is 30 feet tall, the recommended setback is 22.5 feet from the building. Locating the floodlight closer to the building will sacrifice uniformity; setting it farther back will result in loss of efficiency.
Spacing

The rule of thumb for spacing floodlights is not to exceed two times the setback distance. If the setback is 22.5 feet, the floodlights should not be placed more than 45 feet apart.
Aiming

The floodlight should be aimed at least 2/3 the height of the building. For example, if a building is 30 feet high, the recommended aiming point is approximately 20 feet high. After installation is complete, aiming can be adjusted to produce the best appearance. Mounting a full or upper visor to the floodlight can reduce unwanted spill light.

For more details click this link