Design Plan CUL

. Cast Stainless Steel body

. Stainless steel thread on lens frame

. .400" thick low iron tempered glass lens

. Internal rotatable linear spread lens holder...adjustable regardless of body orientation

. 39W Par 20 ceramic metal halide

. Integral universal voltage

electronic ballast

. Optional para hex louver or color filter

. Two 3/4" conduit entries

.CSA listed wet label IP67

Manufacturer: Design Plan

Applications: Accent Lighting, Facade Lighting, Landscape

Spec Sheet (435 KB pdf file)

Design Tips

Facade Lighting
When lighting building facades with ground-mounted floodlights, three factors are considered:
Setback

The recommended setback is 3/4 times the building height. If a building is 30 feet tall, the recommended setback is 22.5 feet from the building. Locating the floodlight closer to the building will sacrifice uniformity; setting it farther back will result in loss of efficiency.
Spacing

The rule of thumb for spacing floodlights is not to exceed two times the setback distance. If the setback is 22.5 feet, the floodlights should not be placed more than 45 feet apart.
Aiming

The floodlight should be aimed at least 2/3 the height of the building. For example, if a building is 30 feet high, the recommended aiming point is approximately 20 feet high. After installation is complete, aiming can be adjusted to produce the best appearance. Mounting a full or upper visor to the floodlight can reduce unwanted spill light.

For more details click this link